Hebei DENENG Trade Co., Ltd

Hydraulic Motor Disc Valve Motor Characteristic features: BM8 motor is a disc calve type geroior motor. Advanced desian in disc distribution flow. Which can provide improved performance at low speed. Advanced design of shaft seal, which can bear higher pressure. Advanced distribution mechanism design, which has the automatic compensation function. Double-rolling bearing design, which permit higher radial loads. A variety of connection types of flange. Output shaft and oil port. Main Specification Displacement(ml/r) 310 390 500 630 800 1000 1250 1600 Flow(LPM) Cont. 150 150 150 150 150 300 312 320 Int. 225 225 225 225 225 340 400 400 Speed(RPM) Cont. 484 385 307 241 320 300 250 200 Int. 699 572 454 355 400 350 320 250 Pressure(MPa) Cont. 20.5 20.5 17 16 16 16 16 16 Int. 31 31 24 25 25 25 25 25 Torque(Nm) Cont. 928 1156 1215 1411 1800 2200 2800 3600 Int. 1356 1633 1685 2217 2800 3200 4400 5500 Note: 1. Intermittent means the entrance of the maximum pressure; continuous working pressure means the differential pressure. 2. Motor should not work under the highest pressure and the maximum speed. 3. The running time should not exceed 10% under intermittent working conditions. 4. Recommending N68 anti-wear hydraulic oil, viscosity 37-73cSt, cleanliness ISO18/13. 5. The maximum working temperature is 80℃. 6. One hour running time under 40% of maximum working pressure is recommended before full capacity working. 7. The maximum allowable back pressure is 10MPa, but the recommended back pressure should not exceed 5MPa, a leaking pipes is needed when exceeding.